Industry Compliance - Crestron Isys TPS-4500LV Operation Manual

12 inch tilt and lectern touchpanels with video

Hide thumbs Also See for Isys TPS-4500LV:

Dimension manual (38 pages)

Table Of Contents

Table of Contents

12 Inch Tilt/Lectern Touchpanels

8 • 12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV

Range of motion is adjustable for user comfort and can vary from 30 to 80 degrees of

inclination from the horizontal. Thus each user can position the touchscreen to a

comfortable angle, just as a microphone can be repositioned to a suitable height for

each speaker. The comfortable angle is herein referred to as user position. The

position lock guarantees that once a user position is established or locked, the angle

will not change from repeated presses on the touchscreen.

The touchscreen is free to move up from the nearly horizontal position to a larger

incremental angle. Grasp the touchscreen with a hand at each side (or just one hand

at either side, as shown after this paragraph) and gently tilt up to a comfortable

position. To activate position lock, slightly reverse the motion until the touchpanel

stops moving. The touchscreen is now set into user position.

NOTE: If the position lock button is held down as the screen is tilted, there are no

audible clicks.

Two-Hand Placement for Tilting a Touchpanel to a Vertical Position

Once in user position, position lock is activated which means the touchscreen cannot

be forced to a horizontal position without pressing the position lock button(s). The

touchscreen is still free to tilt up; a new user position is established at each increment

or audible click.

A position lock button needs to be pressed before the touchscreen can be returned to

a more horizontal position. To press the button, slightly position the touchscreen in

the vertical direction with one or two hands, avoiding any horizontal movement. The

position lock button can then be held down and the touchscreen can be tilted to a

more horizontal position.