Recommended Cleaning; Programming - Crestron Isys i/O TPMC-15-CH Operation Manual

™
Crestron Isys i/O
Hardware Connections for the TPMC-15/17-CH
Hardware Connections for the TPMC-15/17-QM

Programming

Operations Guide - DOC. 6344
TPMC-15/17 Tilt Series
ETHERNET:
10/100 BASE-T FROM POWER PACK
ETHERNET TO LAN
RS-232: USB:
RD
TO PC OR ANY FOR 3 PARTY
RS-232 DEVICE PERIPHERALS
ETHERNET:
10/100 BASE-T FROM POWER PACK
ETHERNET TO LAN (12VDC, 8.4A)
RS-232: USB:
TO PC OR ANY FOR 3 RD PARTY
RS-232 DEVICE PERIPHERALS

Recommended Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid ingress of moisture
beneath the bezels.
For information on programming the TPMC-15 or TPMC-17 touchpanels, refer to
the latest version of the Crestron Isys i/O™ TPMC-15 & TPMC-17 Series
Programming Guide (Doc. 6350).
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Touchpanel Media Centers
POWER:
PC CARD:
FOR (2) TYPE II
(12VDC, 8.4A)
PCMCIA CARDS
CRESNET:
HEADPHONES TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
POWER:
PC CARD:
FOR (2) TYPE II
PCMCIA CARDS
CRESNET:
HEADPHONES TO CONTROL SYSTEM AND
OTHER CRESNET DEVICES
VIDEO IN:
BALANCED VIDEO
OVER CAT5
I/O AUDIO:
BALANCED AUDIO IN AND
MIC OUT OVER CAT5
QM IN:
CARRIES AUDIO, VIDEO, RGB,
AND MICROPHONE SIGNALS
QM OUT:
CARRIES AUDIO, VIDEO, RGB,
AND MICROPHONE SIGNALS
49