Specifications - Crestron Isys i/O TPMC-15-CH Operation Manual

Touchpanel Media Centers
8 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O

Specifications

The following provides a summary of specifications for the TPMC-15-CH/QM and
TPMC-17-CH/QM touchpanels.
Specifications for the TPMC-15-CH/QM and TPMC-17-CH/QM Touchpanels
SPECIFICATION
Power Requirements
Default Network ID
Timeout
Signal Join Maximums
Control System Update
1,2
Files
2-Series Control System
Video Inputs
Audio Inputs
Video Outputs
Audio Outputs
(continued on next page)
™
TPMC-15/17 Tilt Series
DETAILS
101 Watts (8.4 Amp @ 12 VDC)
From supplied power supply
03
Adjustable from 0 to 120 minutes (Default = 15
min.)
4000 Digital, Analog, and Serial
Version 3.137.CUZ or later
QM Version
(2) QuickMedia
channels over RJ-45
from a QM
transmitter. Supports
RGB (up to 1600 x
1200 @ 60 Hz),
YP P , S-video, and
R B
composite, NTSC or
PAL. Delay
compensation (up to
22ns) on input
labeled QM1.
QM Version
(2) QuickMedia
channels over RJ-45.
Each input carries
one pair of stereo
signals plus
microphone audio.
QM Version
(1) QuickMedia
channel over RJ-45.
Outputs RGB at
touchpanel's native
resolution and aspect
ratio.
QM Version
(1) QuickMedia RJ-45
output over CAT5.
Carries Embedded
PC audio and
microphone audio.
Operations Guide - DOC. 6344
CH Version
(2) Balanced, analog,
RJ-45 video inputs
over CAT5 from
CNX-PVID (or
similar) device.
Supports YP P ,
R B
S-video, and
composite, NTSC or
PAL.
CH Version
(1) Balanced analog
RJ-45 audio input
over CAT5. Carries
audio from
CNX-BIPAD8 or other
line-level, balanced
audio source.
CH Version
N/A
CH Version
(1) Balanced
microphone RJ-45
audio output over
CAT5 to
CNX-BIPAD8.
Carries microphone
audio.