Tilt Tension Adjustment; Recommended Cleaning - Crestron V12 Operation Manual

V-Panel™ 12" and 15" HD Touch Screen Displays
28 • V-Panel™ 12" and 15" HD Touch Screen Displays: V12 & V15

Tilt Tension Adjustment

Tilt tension on the V12 and V15 is preset at the factory to allow the panel to be tilted
anywhere within its 35 degree tilt range and maintain its position during use. To
tighten tilt tension or to fix the panel at a given tilt position, use the three Allen
screws accessed through the hole in the touch screen base, as shown in the following
illustration.
Position of Allen Screws for Tilt Tension Adjustment
Allen Screws for
Tilt Tension Adjustment

Recommended Cleaning

Keep the surface of the touch screen free of dirt, dust or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Bezels may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touch screen. Wipe touch screen clean and avoid getting moisture
beneath the bezels.
Crestron V12 & V15
Operations Guide – DOC. 6806F