Crestron Isys i/O TPMC-15-CH Operation Manual page 30

Touchpanel Media Centers
26 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O
If a project is running, the SETUP MENU can be accessed using one of two
methods:
Via USB Keyboard
1. Attach a USB keyboard as shown in "Hardware Hookup" on page
48.
2. Open the "Validate User Account Info" window (shown below) by
pressing Ctrl+Alt+Shift on the keyboard.
"Validate User Account Info" Window
3. Enter the user account tpmcadmin, and the password tpmcadmin
and click Validate.
NOTE: The password is case sensitive. After logging in, the
password can be changed from the "Security" window. Refer to
page 28 for more information.
4. When the "TPMC Debug Output" window appears (shown below),
select Project | Enter Setup Mode to enter the SETUP MENU
(shown on page 27).
"TPMC-15-QM Debug Output" Window
Via Crestron Toolbox
NOTE: The Crestron Toolbox (replacement for Crestron Viewport, you
may continue to use Viewport if desired) is a broad-based software package
that accomplishes multiple system tasks, primarily using an RS-232 or
TCP/IP connection between a PC and one or more Crestron control
systems.
™
TPMC-15/17 Tilt Series
Operations Guide - DOC. 6344