Crestron Isys i/O TPMC-15-CH Operation Manual page 61

™
Crestron Isys i/O
Operations Guide - DOC. 6344
TPMC-15/17 Tilt Series
5. Once the cable connections are made, open Crestron Toolbox and click
Tools | Manage Address book to display the "Address Book" window.
6. Click Add Entry and type a name for the new device.
7. Click TCP as the connection type. Enter the IP address or hostname of the
touchpanel and click OK.
"Address Book" Window – TCP/IP Setup
8. Click Tools | System Info to display the "System Info" window. From the
pull-down menu, select the entry created in step 7.
If the touchpanel is to communicate with a control system over TCP/IP, an IP table
must be created on the touchpanel to identify the control system(s) it will
communicate with over TCP/IP.
Use the following instructions to create the IP table.
1. Select Functions | IP Table Setup from the Toolbox menu bar.
"IP Table" Window
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Touchpanel Media Centers
57