Crestron Isys i/O TPMC-15-CH Operation Manual page 62

Touchpanel Media Centers
58 Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series
Crestron Isys i/O
2. If the touchpanel already has an IP table, it is displayed at the top of the
window.
3. Click Add Entry to add a new IP table entry or select an existing IP entry
from the list and click Modify Entry. Up to 252 entries can be listed on a
touchpanel's IP table. Click Remove [Del] to remove a selected IP entry or
click Clear List to remove all of the entries from the IP table.
NOTE: IP table entries that have not yet been sent to the device are listed in
Red.
4. Click Load From File... to browse for a saved IP table.
"Open" Window
5. To enter a new IP ID, select the hexadecimal IP ID of the control system
from the IP ID list. The IP ID of the control system must match the IP ID
that is specified for the control system in the SIMPL Windows program.
"IP Table Entry" Window
NOTE: All IP table entries are set as Master and cannot be changed.
™
TPMC-15/17 Tilt Series
Operations Guide - DOC. 6344