Table of Contents
Advertisement
SECTION 4: OPERATIONS
To reduce your risk of
serious injury, read this
entire
using machine.
Eye injuries, respiratory problems, or hear-
ing loss can occur while operating this
tool. Wear personal protective equipment to
reduce your risk from these hazards.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
-18-
manual
BEFORE
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To complete a typical operation, the operator
does the following:
1.
Fills tank with water past minimum fill line.
2.
Puts on safety glasses, respirator, hearing
protection, and any other required protective
equipment.
3.
Places tile on table firmly against fence or
miter guide, or uses some other guiding fix-
ture to guide tile while using bevel table.
4.
Adjusts splash hood to height of tile.
5.
Connects machine to power.
6.
Turns tile saw ON.
7.
Applying light pressure, begins cut.
8.
Slowly and carefully pushes tile through
blade.
9.
Turns tile saw OFF when cutting operation is
complete.
Model T30945 (Mfd. Since 12/19)
Advertisement
Table of Contents
