Identification - Grizzly T30945 Owner's Manual

Become familiar with the names and locations of the controls and features shown below to better understand
the instructions in this manual.
Miter Guide
Rip Fence
Rip Fence
Lock Lever
ON/OFF Paddle
Like all machinery there is potential danger
when operating this machine. Accidents
are frequently caused by lack of familiarity
or failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, seri-
ous personal injury may occur.
Model T30945 (Mfd. Since 12/19)

Identification

Splash Hood
Table
Switch
Rear Support
Bevel Table
Blade
Overflow
Drain Plug
(Underneath bevel table)
For Your Own Safety Read Instruction
Manual Before Operating Saw
a) Wear eye protection.
b) Use splash hood for every operation for
which it can be used.
c) Disconnect saw before servicing, when
changing blades, and cleaning.
d) Use tool only with smooth edge blades
free of openings and grooves.
e) Replace damaged blades before operating.
f) Do not fill water bath above water fill line.
Water Return
Trough
Wrench Storage
Water Bath
-3-