Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
B
A
H
G
Figure 1. Tile saw components (front).
A. Rip Fence: Provides straight edge to hold
workpieces against during cutting operations.
B. Miter Guide: Supports workpieces at precise
angles for repeatable miter cuts.
C. Main Table: Supports workpiece during cut-
ting operation.
D. Splash Hood: Protects user from rotating
blade and helps contain overspray.
E. Rear Support: Provides ripping support for
larger tiles up to 24".
-4-
manual
BEFORE
C
D
E
F
F.
Wrench Storage: Provides convenient stor-
age for arbor and arbor nut wrench for easy
blade replacement.
G. ON/OFF Paddle Switch: Turns motor ON
and OFF.
H. Rip Fence Lock: Secures rip fence in place
along front rail.
I
Figure 2. Bevel table in 45˚ position.
I.
Bevel Table: Tilts to provide table support for
bevel cuts. Stops at 22.5˚ and 45˚.
L
Figure 3. Tile saw components (inside).
J.
Water Fill Lines: Displays minimum and
maximum volume of water required to oper-
ate saw.
K. Water Return Trough: Returns excess water
to water bath.
L.
Overflow Drain Plug: Drains excess water
and removes to drain water bath.
Model T30945 (Mfd. Since 12/19)
J
K
Advertisement
Table of Contents
