Teledyne 300E Instruction Manual page 82

Operating Instructions
6.6.3.1. AIN A/C Frequency
To switch the analyzer's line power frequency press:
Select the AC frequency of
the Line Power being
Supplied to the analyzer.
6.6.3.2. AIN Calibration
82
STARTING FROM DIAGNOSTIC MENU
DIAG
PREV NEXT
DIAG AIO
SET>
DIAG AIO
50 HZ 60 HZ
DIAG AIO
SET> EDIT
STARTING FROM DIAGNOSTIC MENU
DIAG
PREV NEXT
DIAG AIO
SET>
DIAG AIO
< SET SET>
Calibrates
DIAG AIO
Automatically
DIAG AIO
< SET SET>
Model 300E Carbon Monoxide Analyzer
(see Section 6.6)
ANALOG I / O CONFIGURATION
ENTR
AIN A/C FREQUENCY:
60 HZ
EDIT
AIN A/C FREQUENCY: 60 HZ
ENTR
AIN A/C FREQUENCY: 50 HZ
(see Section 6.6)
ANALOG I / O CONFIGURATION
ENTR EXIT
AIN A/C FREQUENCY: 60 HZ
EDIT EXIT
AIN CALIBRATED: NO
CAL EXIT
CALIBRATING A/D ZERO
CALIBRATING A/D SPAN
AIN CALIBRATED: YES
EXIT
CAL
Instruction Manual
EXIT
EXIT
EXIT
Exit to Return
to the Analog I/O
EXIT
Configuration Menu
Exit at Any
Time to Return
to the main
DIAG Menu
Exit to Return to
the Analog I/O
Configuration
Menu
P/N 04288 REV: A