Figure 11-8: Removing The Opto-Pickup Assembly; Figure 11-9: Removing The Gfc Wheel Housing - Teledyne 300E Instruction Manual

TROUBLESHOOTING & REPAIR PROCEDURES
33. Remove the THREE (3) screws holding the GFC Wheel Housing to the GFC
Motor Heatsink.
34. Carefully remove the GFC housing.
220

Figure 11-8: Removing the Opto-Pickup Assembly

GFC WHEEL HOUSING

Figure 11-9: Removing the GFC Wheel Housing

Model 300E Carbon Monoxide Analyzer
Opto-Pickup
Instruction Manual
P/N 04288 Rev: A