Operation; Cleaning And Maintenance - Siemens SIMATIC RTLS System Manual

Hide thumbs Also See for SIMATIC RTLS:
Table of Contents

Advertisement

Anchors
5.4 SIMATIC RTLS4430A
Installation with support - Corner installation
Follow the steps below to mount the device to a corner:
1. Use the corner support as template and draw the bore holes on the corner.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Mount the corner support to the corner.
5. Mount the device to the corner support using the screws (M4). (Screws are not supplied with
the device.)
Installation with support - Mast mounting
Follow the steps below to mount the device to a mast:
1. Use the mast mount as template and draw the bore holes on the mast.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Install the mast mount to the mast.
5. Install the device to the mast mount using the screws (M4). (Screws are not supplied with
the device.)
Note
If drilling is not possible, you can also fasten the mast mount to the mast with cable ties, for
example.
5.4.2.3

Operation

The device is not suitable for operation in hazardous areas.
Operation of the system to EN 60950-1 is only safe when the housing cover is installed (cooling,
fire protection, interference suppression).
In case of emergencies (e.g. when the enclosure is damaged, when liquids or foreign objects
are entering the device), the device must be disconnected from the power supply and
maintenance must be contacted immediately.
5.4.2.4

Cleaning and maintenance

The device may only be opened by suitably trained and qualified personnel. Only authorized
dealers are permitted to repair the device.
Unauthorized opening of and improper repairs to the device may cause substantial risks to the
user. As soon as the device was opened without permission, warranty and liability of the
Siemens AG are rendered null and void.
Do not clean the enclosure with abrasive, alkaline or aggressive cleaning products or aids.
62
System Manual, 04/2019, C79000-G8976-C577-01

Advertisement

Table of Contents
loading

Table of Contents