Siemens SIMATIC RTLS System Manual page 61

Figure 5-7
Installation with support - Ceiling installation
Follow the steps below to mount the device to the ceiling:
1. Use the mounting plate as template and draw the bore holes on the ceiling.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Mount the mounting plate to the ceiling.
5. Install the device to the mounting plate using the screws (M4). (Screws are not supplied with
the device.)
System Manual, 04/2019, C79000-G8976-C577-01
Drilling pattern - All dimensions specified in millimeters.
Anchors
5.4 SIMATIC RTLS4430A
61