Siemens SIMATIC RTLS System Manual page 155

● EN 55011
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics –
Limits and methods of measurement
● EN 55032 Class A, Class B
Electromagnetic compatibility of multimedia equipment – Emission requirements
● EN 55035
Electromagnetic compatibility of multimedia equipment - Immunity requirements
● EN 61000-6-1
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for
residential, commercial and light-industrial environments
● EN 61000-6-2
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial
environments
● EN 61000-6-3
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
● EN 61000-6-4
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for
industrial environments
Article 3 (2) Efficient use of the radio spectrum
● ETSI EN 300 328
Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz
ISM band and using wide band modulation techniques. Harmonized standard covering the
essential requirements of article 3.2 of the EU Directive 2014/53/EU
● ETSI EN 302 065-2
Short Range Devices (SRD) using ultra-wideband technology (UWB); Harmonized
standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part
2: Requirements for UWB location tracking
Note
The specified approvals are only valid if the corresponding symbol is printed on the device.
FCC information
Siemens SIMATIC RTLS4084T (MLFB 6GT2700-7DC03); FCC ID NXW-RF380R02
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
System Manual, 04/2019, C79000-G8976-C577-01
Transponder
7.4 SIMATIC RTLS4084T
155