Steps
1. Align the slot on the memory module with the notch on the memory module slot on the system board.
2. Slide the memory module into the slot on the system board.
3. Press down on the memory module to snap it into place.
4. Ensure that the securing clips have locked the memory module into place.
NOTE:
If the securing clips do not lock the memory module into place remove the memory module from the slot and
repeat steps 1 to 3.
5. Repeat the above procedure for the second memory module.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
About this task
The following images indicate the location of the speakers and provides a visual representation of the removal procedure.
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.