To Remove A Front System Fan; Replacing A Front System Fan - Nortel CallPilot 703t Maintenance And Diagnostics

Replacing basic chassis components

Replacing a front system fan

Replace a malfunctioning fan with the same type as the one removed.
For more information about replacing a fan, contact your Nortel
customer service representative.
Note: The fan replacement kit contains four fans: two front fans and two
rear fans.

To remove a front system fan

.
1 Prepare the server for front system fan replacement as follows:
a. Shut down the server, and then disconnect the power and
b. Place the server on its side.
c. Remove the side cover.
d. Remove the upper fan holder foam.
For instructions, see "Preparing the server for hardware
maintenance," on page 120.
.
134
CAUTION
Risk of equipment damage
Use an ESD wrist strap to protect static-sensitive components.
peripheral device cables.
WARNING
Risk of personal injury or equipment damage
Failure to follow the procedures in "Preparing the
server for hardware maintenance," on page 120 can
result in electrical shock or equipment damage.
Standard 1.06
CallPilot