Removing The Top Panel - Siemens MULTIMOBIL 10 Troubleshooting Manual

Service Manual
Service Instructions
3 Troubleshooting
In case of Code, perform the following checks.
3.1 Removing the top panel, front cover and X-ray source assembly

3.1.1 Removing the top panel

Turn off the Multimobil 10,disconnect the mains chord and wind the cord around the
cable holder.
Lower the X-ray source assembly to transport position. Lock the Multimobil 10 by
applying the brake.
Unscrew the two ornamental screws (see location in figure) with 2.5 mm allen key.
Grasp the top panel and lift it (as shown in figure).
Siemens Ltd. Med Division India Version 4.0 Page 16 of 48