Background Signaling Diagnostic Messages (Bsdxxx) - Nortel Meridian 1 Administration And Maintenance
Hide thumbs
Also See for Meridian 1:
- Manual (1121 pages) ,
- Planning and installation manual (612 pages) ,
- Planning, installation and operating instructions (556 pages)
Table of Contents
Advertisement
Page 396 of 492
Background signaling diagnostic messages (BSDxxx)
553-3011-311
Standard 7.0
Chapter 8 — Service changes and maintenance
BSD800
Command is being executed.
BSD801
Call register not available. Wait and try the command again. If the problem
persists, increase the number of call registers using Configuration Record
Program LD 17.
BSD802
Specified card slot not equipped.
BSD803
Specified card not equipped.
BSD804
Time slot is busy.
BSD805
Time slots are not available.
BSD806
Loopback channel is not available.
BSD807
Timeout is waiting for network response.
BSD808
DSL is busy.
BSD809
DSL is in maintenance busy mode.
BSD810
Specified Controller card does not belong to the specified Network card.
Make sure you entered correct shelf number.
BSD811
Terminals not installed at specified DSL.
BSD812
Digital terminal not available at specified terminal number.
BSD815
Wait for the prompt.
May 1999
Advertisement
Table of Contents
Troubleshooting
