Radio Paging Access - Nortel M2016S User Manual

Making a call

Radio Paging access

To use Automatic
pre-selection
("Meet - me" paging)
To use Automatic
post-selection
∫
Radio Page
40
You want to contact a person. They are
either busy on a call or you want to page
someone without calling their DN. You want
to directly alert their radio paging device.
1. Lift the handset or press a DN key.
2. Dial the Radio Paging FFC. You hear the
paging dial tone.
3. Dial the DN of the party to be paged.
You hear ringback tone.
While ringback is heard, the person you
have paged may proceed to any DN and
enter a Radio Paging Answer code plus their
own DN to be connected directly to you.
If your call is not answered within a preset
time period you hear a continuous
high-pitched tone for fifteen seconds, then
silence. Replace the handset or press
Release and try again later.
The called party is either busy on the set or
away from the desk.
To page the called party, there is no need to
make a new call.
1. Press Radio
tone.
Page. You hear special dial