Ç s
Studs
The Construction Master Pro also calculates the number of studs
required for a wall using an entered length and stored on-center
spacing value.
Ç 5
Trigonometric Keys (
Riser Limited — Used for situations when the riser
height is limited by local code. When you press Ç
s, the calculator will recalculate stair values so
that the actual riser height will not exceed your
stored desired riser height (e.g., it will never exceed
the stored desired riser height of 7-1/2 inches, if
7-1/2 inches is the value stored using ß 7). To
compensate for this limitation, the calculator will add
one to the number of risers.
Studs — Calculates the number of studs for an
entered or displayed linear value. Based on the
stored on-center spacing (16 inches is the default).
#4080
TRIG
Tangent Ø =
Sine Ø
=
Cosine Ø
=
#44080
AND DESKTOP
Opposite
Adjacent
Opposite
Hypotenuse
Adjacent
Hypotenuse
MODELS ONLY
U
'
G
— 23
SER
S
UIDE
)