Test Button - Brother HL-2400Ce Series User Manual

USER'S GUIDE

TEST Button

4–80
You can test the printer or print the list of fonts with the Test button. To
do so, hold down the Shift button and press the Test button. You will
then enter the test mode where you can test the printer or print the list of
fonts.
To test the printer, follow these steps:
1. Press the Sel button to take the printer off-line.
Hold down the Shift button and press the Test button.
2.
When you enter test mode, the display shows the first test
mode item.
3. Press the or
on the display.
Display Message
DEMO PAGE
TEST PRINT
PRINT CONFIG
PRINT FONTS I
PRINT FONTS C
PRINT FONTS P
exit
button until the test mode you want appears
Test Mode
Prints the demonstration page.
Performs the printer test and prints the
test pattern.
Prints the list of control panel settings
you have configured for the printer as
user settings.
Prints the list of internal or resident
fonts.
Prints the list of optional fonts stored in
the font card.
Prints the list of permanent download
fonts.
Exits from the test mode. The printer
does not perform the test.