Service Call Messages - Brother HL-2400Ce Series User Manual

USER'S GUIDE

Service Call Messages

Service Call Message
61 PROG ERROR
62 FONT ERROR
63 D-RAM ERROR
66 NV-W ERROR
67 NV-R ERROR
68 NV-B ERROR
88 WARNING C3
88 WARNING C4
88 WARNING C7
88 WARNING D1
88 WARNING D2
99 SERVICE 0-9
6–6
When any of the following messages appear on the LCD, turn the printer
Off , wait 5 seconds and then turn the printer On again. If this does not
clear the problem, consult your dealer or our authorized service
representative.
Meaning
Program ROM checksum
error
Font ROM checksum error
D-RAM error
NV-RAM write error
NV-RAM read error
NV-RAM write / read error
Engine NV-RAM error
Engine controller error
Process timing clock error
Y switching clutch error
M switching clutch error
CPU error
Action
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.
Turn off the printer. Wait a few
seconds, then turn it on again.