Brother HL-2400Ce Series User Manual page 115

To select the font and symbol set in the HP PCL5C mode, follow these steps:
Press the Sel button to take the printer off-line.
1.
Press the Font button and then press the
2.
select the primary or secondary font setting menu.
Press the Set button.
3.
The display shows the font setting menu. You can skip the font
setting menu and advance to the symbol set setting menu with
the or button.
Note
The last lowercase letter "p" or "s" indicates the primary or secondary
font setting mode. If you select the secondary font setting mode, the
display shows "s" in the following messages.
Press the Set button.
4.
When you enter the "SELECT FONT" menu, you can select
the internal font, optional slot font or permanent download
font.
Press the
on the display.
Display Message
INTERNAL FONT
DEVICE1 FONT
DEVICE2 FONT
DEVICE3 FONT
PERMANENT FONT
Since these steps instruct you how to select the standard font,
select the "INTERNAL FONT" message.
Notes
When you select the optional fonts or permanent download fonts, note the
following:
If the optional font cartridge/card is not installed, the optional font
cannot be selected. No selection appears on the display.
If permanent fonts are not downloaded in the HP emulation mode or
another emulation mode is selected, they cannot be selected. No
selection appears on the display.
The list you can print with the Test button helps you to select the
optional fonts or permanent download fonts. See
this chapter or "Selecting the Optional Fonts"
or button until the desired font source appears
Font Source
Internal font of the printer
Optional card font in slot 1
Optional card font in slot 2
Optional HDD.
Permanent download font defined in the
HP emulation mode
CHAPTER 4 CONTROL PANEL
or button to
"TEST button" in
in Chapter 5.
4–51