Brother HL-2400Ce Series User Manual page 117

8. Press the Set button to make the displayed selection effective,
then the display shows the font size selection menu.
Note
When you have selected fixed-pitch fonts, you set the font size by the
character pitch (width). When you have selected proportional spacing
fonts, you set the font size in points (height). The display shows "PITCH"
or "POINT" accordingly.
9. Press the or
the display.
10. Press the Set button to make the displayed selection effective.
The blinking cursor then moves to the decimal part of the
number.
11. Press the or
appears on the display.
Press the Set button to make the displayed selection effective.
12.
The display then shows the symbol set selection menu.
13. Press the Set button.
When you enter the symbol set setting mode, the display first
shows the current symbol set with an asterisk.
14. Press the or
on the display.
See "List of Symbol/Character Sets".
15. Press the Set button to make the displayed selection effective.
The display then shows the next menu.
Press the Set button to start printing the code table of the
16.
selected font, or press the
The display shows the exit menu.
Press the Set button to exit from the setting mode.
17.
18. The printer returns to the off-line state.
button until the desired font size appears on
button until the desired decimal number
button until the desired symbol set appears
or button to skip this menu.
CHAPTER 4 CONTROL PANEL
4–53