Brother HL-2400Ce Series User Manual page 95

Note
Even if you set the resolution to 600 dpi in this mode, the printer may
not be able to print large and complex full color files at 600 dpi
because of insufficient memory. However, it automatically decreases
the resolution to 300 dpi to print them. While the printer is printing in
this mode, the display prompts "01 PR300 ... ."
If the printer cannot print files even at 300 dpi, a "MEMORY FULL"
error occurs. See "TROUBLESHOOTING" in Chapter
This automatic resolution decrease function works with the page
protection on. See also
When you want to print large and complex full color data without
decreasing the resolution, you should expand the memory capacity of
the printer.
CAPT Setting
When you select "CAPT SETTING," you can use the Color Advanced
Photoscale Technology (CAPT) function which offers photographic fine
color on graphics. CAPT setting is available only in BR-Script 2 mode.
This feature requires a minimum of 24 MB of RAM to process large and
complex full color printouts. When you set CAPT=ON, the high
resolution control (HRC) setting is unavailable.
Display Message
CAPT =ON
CAPT =OFF
Note
In the PCL 5C mode, CAPT setting is always ON. It depends on the
printer setting if the printer uses the function or not.
"PAGE PROTECTION" in this chapter.
Advanced Photoscale Technology
Color advanced photoscale technology is
effective.
Cancel the color advanced photoscale
technology. (factory setting)
CHAPTER 4 CONTROL PANEL
6.
4–31