Test Button - Brother HL-3400CN Series User Manual

TEST Button

You can test the printer or print the list of fonts with the Test button. To
do so, hold down the Shift button and press the Test button. You will
then enter the test mode where you can test the printer or print the list of
fonts.
To test the printer, follow these steps:
1.
2.
3.
Display Message
DEMO PAGE
TEST PRINT
PRINT CONFIG
PRINT FONTS I
PRINT FONTS C
PRINT FONTS P
exit
Press the Sel button to take the printer off-line.
Hold down the Shift button and press the Test button.
When you enter test mode, the display shows the first test mode
item.
Press the or button until the test mode you want appears
on the display.
Test Mode
Prints the demonstration page.
Performs the printer test and prints the test
pattern.
Prints the list of control panel settings you
have configured for the printer as user
settings.
Prints the list of internal or resident fonts.
Prints the list of optional fonts stored in the
font card.
Prints the list of permanent download fonts.
Exits from the test mode. The printer does
not perform the test.
CHAPTER 4 CONTROL PANEL
4–83