Repacking And Relocating The Printer - Brother HL-2400Ce Series User Manual

USER'S GUIDE

REPACKING AND RELOCATING THE PRINTER

How to Repack the Printer
5-30
!
Caution
Whenever you transport the printer ALWAYS use the packing
materials that were provided with your printer. Follow the steps
detailed below to re-pack the printer or the printer may be
damaged. This will void the printer's warranty.
Before you ship or move the printer, be sure to take out the following
items and put them in separate bags (do not put them in the printer
carton box):
* Fusing Unit
* Waste Toner Pack
* Toner Cartridges
* OPC Belt Cartridge
Remove the Oil Bottle and then use the syringe supplied with the
printer to remove Oil from the Fusing Unit tray. . Using a cloth, wipe
up any remaining oil that cannot be removed with the syringe.
Discard the oil according to local regulations.
1. Press the Power button and turn the printer off. Unplug the printer.
2. Remove the Waste Toner Pack, the Toner Cartridges, the Fusing Unit
and the OPC Belt Cartridge from the printer. Place them in their
original packaging. Do not place them together with the printer in
the printer carton.
3. Place the printer in its original packing material and in the original
carton.
4. Close the carton and tape it securely.
Fig. 5-37 Removing the Oil