Advanced Mode - Brother HL-2400Ce Series User Manual

USER'S GUIDE

ADVANCED MODE

4–42
• Format Device
You can format the flash memory card, HDD card or optional HDD to
delete its contents. Instructions are in the following menu:
FORMAT DEVICE
When you press the Set button in this menu, the printer asks if you want
to delete all contents of the device. Then press the Set button to start
formatting the device.
When you want to cancel formatting, move to the next menu with the
button and press the Set button.
or
NETWORK MODE
Display Message
LOCK PANEL=OFF
AUTO FF=ON
FF SUPPRESS=OFF
Lock panel
If someone other than you has changed the control panel settings and you
do not know about it, the printer may not print as expected or it may not
print at all.
To address this problem, lock or unlock the control panel as follows:
Display Message
LOCK=OFF
LOCK=ON
Even if the control panel is locked, you can still use the Sel, Form
Feed, Copy, Continue, Reset and Test buttons for their standard
functions. You can only check the settings of the other buttons, you
cannot make changes to them.. To change these settings you must first
unlock the control panel.
Network Mode
Turns on or off lock panel function.
Turns on or off auto form feed.
Turns on or off the form feed suppress
function.
Lock Panel
Unlock the panel buttons of the printer.
(Factory setting)
Lock the panel buttons of the printer.