USER'S GUIDE
Printer Status Message
00 READY 001P T1
00 IDLE
001P T1
AUTO PCL5C
HP PCL5C
00 BUSY
001P T1
00 SLEEP 001P T1
01 PRINT 001P T1
01 PR300 001P T1
02 WAIT
001P T1
04 SELF TEST
05 TEST PRINT
06 DEMO PAGE
06 PRINT CONFIG
06 PRINT FONTS I
06 PRINT FONTS C
06 PRINT FONTS P
06 DEVICE1 PRINT
06 DEVICE2 PRINT
06 DEVICE3 PRINT
4–2
Printer Status Messages (on the upper row)
The following table shows the printer status messages that are displayed
during normal operation:
Meaning
The printer is ready to print.
The printer is idle. (BR-Script 2 mode only)
The printer is off-line and currently in HP PCL5C mode
under AUTO emulation mode selection.
The printer is off-line and in HP PCL5C mode under HP
LaserJet emulation mode manual selection.
The printer is busy. (BR-Script 2 mode only)
The printer is in sleep status (power save mode).
The printer is printing.
The printer is printing by decreasing the resolution from
600 dpi to 300 dpi because of insufficient memory.
The printer is warming up.
The printer is performing self-diagnosis.
The printer is printing the test pattern.
The printer is printing the demonstration.
The printer is printing the list of the current printer
settings.
The printer is printing the list of the internal or resident
fonts.
The printer is printing the list of the optional fonts stored
in an installed font card.
The printer is printing the list of the permanent download
fonts.
The printer is printing the contents of a flash memory
card in slot 1.
The printer is printing the contents of a flash memory
card or HDD card in slot 2.
The printer is printing the contents of optional HDD.