Copy Button - Brother HL-2400Ce Series User Manual

USER'S GUIDE

COPY Button

4–72
You can set the number of copies to print of the same page with the
Copy button. The job will print faster than choosing the copy print
quantity from within your application software. Check the current setting
on the display.
When the number of copies has been set to 3, the display may look as
follows:
LJ READY 003P T1
AUTO
Note
If you send too many pages to be stored in the printer memory, part or all
of the set of pages or copies may not be printed.
To set the number of copies, follow these steps:
Press the Sel button to take the printer off-line.
1.
Hold down the Shift button and press the Copy button.
2.
When you enter the setting mode, the display first shows the
current setting with the asterisk.
3. Press the or
the display.
Display Message
COPY PAGES=
COPY PAGES=
...
COPY PAGES=999
Press the Set button to make the displayed selection effective.
4.
For a short time an asterisk appears at the end of the display.
The printer then automatically exits from the setting mode to
the off-line state.
button until the desired number appears on
# of Copies to Print Same Pages
1
1 page
2
2 pages
. . .
999 pages (max.)