About Routine Maintenance Messages - Brother HL-2400Ce Series User Manual

USER'S GUIDE
Current Emulation
"##"... Fixed emulation expressed with double figures
"LJ"... AUTO HP PCL5C emulation
"BS"... AUTO BR-Script 2
"GL"... AUTO HP-GL emulation
"FX"... AUTO EPSON FX-850 emulation
"PR"... AUTO IBM Proprinter XL emulation

About Routine Maintenance Messages

4–4
LJ PRINT 002 L T1
AUTO
Copy Pages Orientation
Fig. 4-2 Display
This printer has some user serviceable parts that require periodic
replacement. The printer counts the number of printed pages and detects
the life of each of these parts. When the part nears the end of its useful
life, the following messages appear on the LCD display. These messages
will over-write the Emulation Mode status information.
Refer to Chapter 5 for detailed information on consumables life.
Maintenance Message
K
FUSER OIL LOW
REPLACE FCR
REPLACE OPC BELT
REPLACE FUSER
REPLACE 120K KIT
*1 - After replacing these parts, you must reset the part life counter. This
enables the printer to begin tracking the part life correctly again. See
"Maintenance" in Chapter
K C M Y
"P"... Portrait
"L"... Landscape
"p"... Reverse Portrait
"l"... Reverse Landscape
Emulation Mode
AUTO: Auto emulation selection
PCL5C: HP PCL5C fixed
BRScript: BR-Script fixed
HP-GL: HP HP-GL fixed
FX-850: Epson FX-850 fixed
Pro.XL: IBM Proprinter XL
Meaning
When the
indicated color toner is nearly
empty. K: Black, C: Cyan, M:
C M Y
Magenta, Y: Yellow. When the
toner becomes empty the
indicator disappears completely.
Oil in the Oil Bottle is nearly
empty.
*1 Time to replace the Fuser Cleaner.
*1 Time to replace the (OPC) Belt
Cartridge.
*1 Time to replace the Fusing Unit.
*1 Time to replace the Drum Cleaner,
the Paper discharger and the
Transfer Drum.
5.
Paper Source
"T1"... Tray 1
"T2"... Tray 2
"MN"... Manual Feed
Toner Level
: sufficient toner
I
(blinking ) : toner nearly empty
I
- disappear: toner empty
Status
mark blinks ( ), the