Power Distribution Unit And Power Cord Options For 7014, 0551, 0553, And 0555 Racks - IBM 8202-E4B Manual

8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, 8205-E6D, 8231-E2B,
8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, and 8268-E1D uninterruptible power
supply communications
For IBM Power 710 Express and IBM Power 730 Express (8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C,
8231-E2D, and 8268-E1D), IBM Power 720 Express (8202-E4B, 8202-E4C, and 8202-E4D), and IBM Power
740 Express (8205-E6B, 8205-E6C, and 8205-E6D), feature code 3930 is used in addition to feature code
1827. Uninterruptible power supply communications are supported through a designated RJ45 port via
the 3930 cable. See Figure 132 and Figure 133. The 9 pin, male end of the 3930 cable then attaches to the
end of the 9 pin, female end of the 1827 cable. See Figure 134.
Figure 132. 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, and 8268-E1D rear view with cable installation
location
Figure 133. 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, and 8205-E6D rear view with cable installation
location
Figure 134. Uninterruptible power supply wiring for the 8202-E4B, 8202-E4C, 8205-E6B, 8205-E6C, 8231-E2B,
8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, and 8268-E1D
Power distribution unit and power cord options for 7014, 0551, 0553,
and 0555 racks
Power distribution units (PDUs) can be used with the 7014, 0551, 0553 and 0555 racks. The various
configurations and specifications are provided.
138
Site and hardware planning