Download
Share
Print this page
IBM Power System AC922 Quick Install Manual
  1. Manuals
  2. Brands
  3. IBM Manuals
  4. Power Supply
  5. Power System AC922
  6. Quick install manual

IBM Power System AC922 Quick Install Manual

Hide thumbs Also See for Power System AC922:

Advertisement

Quick Links

Download this manual
IBM Power System AC922 (8335-GTX)
Quick Install Guide
IBM

Advertisement

loading

Related Manuals for IBM Power System AC922

Summary of Contents for IBM Power System AC922

  • Page 1 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 2 ® ™ This 2021-05-20 edition applies to IBM Power Systems servers that contain the POWER9 processor and to all associated models. © Copyright International Business Machines Corporation 2018, 2020. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with...
  • Page 3 Use normal electrostatic discharge (ESD) procedures when working on the system and parts. IBM recommends wearing gloves and an ESD wrist strap to avoid possible damage to the equipment. The information about the 8335-GTX system is available online in the IBM Knowledge Center. http:// www.ibm.com/support/knowledgecenter/8335-GTX ©...
  • Page 4 2 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 5 Parts Use this information to find the field-replaceable unit (FRU) part numbers. Figure 1. Rack final assembly © Copyright IBM Corp. 2018, 2020...
  • Page 6 Figure 2. System parts 4 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 7 Figure 3. Additional system parts (8335-GTC, 8335-GTG, or 8335-GTH air-cooled system) Parts 5...
  • Page 8 Figure 4. Additional system parts (8335-GTW or 8335-GTX water-cooled system with 4 GPUs) 6 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 9 Figure 5. Additional system parts (8335-GTW or 8335-GTX water-cooled system with 6 GPUs) Parts 7...
  • Page 10 8 IBM Power System AC922 (8335-GTX) Quick Install Guide...

  • Page 11: Rear Ports

    Intelligent Platform Management Interface (IPMI) serial Ethernet. Use the top Ethernet port for the BMC/ IPMI interface (as PHY0). Use the bottom Ethernet port for any direct operating system usage (as PHY1). USB 3.0 © Copyright IBM Corp. 2018, 2020...
  • Page 12 10 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 13 Installing and removing IBM Power System AC922 (8335-GTX) parts Figure 7. Removing the power supplies from the system Figure 8. Removing the cover Figure 9. Disk drive lock detail Figure 10. Removing a fan from the system © Copyright IBM Corp. 2018, 2020...
  • Page 14 Figure 11. Removing the disk and fan signal cable Figure 12. Removing the fan power cable from the system Figure 13. Removing the front pipe holder Figure 14. Moving the front pipe away 12 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 15 Figure 15. Screw locations for the disk drive and fan card Figure 16. Removing the disk drive and fan card Figure 18. Location of the memory modules Figure 17. Removing a memory module Installing and removing IBM Power System AC922 (8335-GTX) parts 13...
  • Page 16 Figure 19. Removing the time-of-day battery from the system backplane Figure 20. Removing a PCIe adapter Figure 21. Removing the BMC card 14 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 17 Figure 22. Location of the connectors for the USB cable and connector and the power switch and cable Figure 24. Removing the rack installation support Figure 25. Remove the top and side screws Installing and removing IBM Power System AC922 (8335-GTX) parts 15...
  • Page 18 Figure 27. Removing USB cable and connector from the power switch Figure 26. Pull out the power switch and cable Figure 28. Open the cold plate retainer Figure 29. Remove the cold plate; attach to clip 16 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 19 Figure 31. Remove GPU Figure 30. Remove eight GPU screws per GPU; do not loosen the four spring-loaded screws Figure 32. Replace GPU Figure 33. Replacing the GPU assembly into GPU socket Installing and removing IBM Power System AC922 (8335-GTX) parts 17...
  • Page 20 Figure 34. Aligning the cold plate on the GPUs Figure 35. Secure the cold plate retainer screw Figure 36. Remove the middle support side screws Figure 37. System backplane screw locations 18 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 21 Figure 38. Lifting out the system backplane Figure 40. Removing the cold plate and attaching the protective cover Figure 39. Loosening the cold plate retainer screw Installing and removing IBM Power System AC922 (8335-GTX) parts 19...
  • Page 22 Figure 43. Lowering the removal tool onto the Figure 44. Placing the tool at an angle on the top system processor module cover of the packaging 20 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 23 Figure 45. Placing the tool at an angle on the top cover of the packaging Figure 48. Removing the protective cover from the cold plate Figure 47. Installing a new TIM onto the system processor module Installing and removing IBM Power System AC922 (8335-GTX) parts 21...
  • Page 24 Figure 49. Tightening the cold plate retainer screw 22 IBM Power System AC922 (8335-GTX) Quick Install Guide...
  • Page 26 IBM®...

This manual is also suitable for:

8335-gtx