Table 117. Dimensions for rear door heat exchanger
Width
Depth
600 mm (23.6 in.)
129 mm (5.0 in.)
For more information, see "Model 1164-95X rear door heat exchanger" on page 65.
Electrical
For electrical requirements, see Power distribution unit and power cord options.
Features
The 7953-94X and 7965-94Y rack has the following features available for use:
v Recirculation prevention plate that is installed at the bottom, front of the rack.
v Stabilizer bracket that is installed at the front of the rack.
Caster locations
The following diagram provides the caster locations for the 7953-94X and 7965-94Y rack.
Figure 24. Caster locations
Cabling the 7953-94X and 7965-94Y rack
Learn about the different cable routing options available for the 7953-94X and 7965-94Y rack.
Cabling within the rack
Side cable channels are available in the rack to route cables. There are two cable channels on each side of
the rack as shown in Figure 25 on page 62.
Height
1950 mm (76.8 in.)
Weight (empty)
39 kg (85 lb)
Hardware specification sheets
Weight (filled)
48 kg (105 lb)
61