Running In - BMW R 1200GS 2016 Rider's Manual

Have the malfunction corrected
6
as soon as possible at an
authorized service facility,
102
preferably an authorized
BMW Motorrad Retailer.
DTC self-diagnosis
with Dynamic Traction Control
OE
(DTC)
The self-diagnosis routine
z
is determining whether
BMW Motorrad DTC is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition.
Phase 1
Check on system components
monitored by diagnostic sys-
tem while motorcycle is parked.
DTC indicator and warning
light flashes slowly.
Phase 2
Checks diagnosis-capable sys-
tem components when motor-
cycle starts to move.
DTC indicator and warning
light flashes slowly.
DTC self-diagnosis
completed
The DTC symbol is no longer
displayed.
Check the display of all indica-
tor and warning lights.
DTC self-diagnosis not
completed
The DTC function is not
available, as the self-diagnosis
function has not been
completed. (To check wheel
speed sensors, motorcycle
must reach a minimum speed
with engine running: min
3 mph (min 5 km/h))
If an DTC error is displayed after
the DTC self-diagnosis is com-
pleted:
It remains possible to con-
tinue riding. It must be noted
that the availability of the DTC
function is restricted or it is not
available at all.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.

Running in

Engine
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently; avoid driving for long
periods at a constant speed.
Choose curvy, slightly hilly sec-
tions of road if possible.
Observe the engine run-in
speeds.