BMW R 1200GS 2016 Rider's Manual page 152

to replace the light source for
8
the high beams.
150
Disconnect plug 1.
z
Release wire spring 1 from the
detent and fold to side.
Remove light source 2.
Replace defective light source.
Bulbs for low-beam
headlight
H7 / 12 V / 55 W
Bulb for high-beam
headlight
H7 / 12 V / 55 W
To protect the glass against
soiling, only grasp the light
source by the base.
Insert the light source 2, taking
care to ensure that the lug 3 is
positioned correctly.
NOTICE
The alignment of the bulb may
differ from the illustration.
Insert wire spring 1 into the
detent.
Connect connector 1.
Position cover panel and install
it by turning clockwise.