Riding Mode - BMW R 1200GS 2016 Rider's Manual

DYNA
: damping for dynamic
riding on roads
ENDURO
: damping for off-
road riding. Is only available in
ENDURO ENDURO
the or
PRO
riding modes and can not
be adjusted further in these
riding modes.
To set the spring preload:
Starting engine ( 99).
Press and hold button 1 re-
peatedly until desired setting is
displayed.
NOTICE
The spring preload cannot be
adjusted while the motorcycle is
being ridden.
The following settings are avail-
able:
MIN
: minimum spring preload
AUTO
: automatic adjustment
of the spring preload
MAX
: maximum spring preload
If the button 1 is not pressed
for an extended period, the
damping rate and the spring
preload will be adjusted to the
displayed settings.
The D­ESA display flashes dur-
MIN
ing the adjustment to
MAX
.
At very low temperatures, un-
load the motorcycles before
increasing the spring preload,
and have the passenger dis-
mount if necessary.
The D-ESA display disappears
once the setting procedure has
been completed.
AUTO
In the loading mode
the spring preload is only ad-
justed after driving off.

Riding mode

Use of the riding modes
BMW Motorrad has developed
riding scenarios for your motor-
cycle from which you can select
the one matching your situation:
Series
or
Riding on wet roads.
Riding on dry roads.
with riding modes Pro
With riding mode Pro
Brisk riding on dry roads.
Riding off-road with road tires
With riding mode Pro and
installed coding plug
Dynamic riding on dry roads
,
taking into account settings
made by the rider.
Off-road riding with knobby off-
road tires taking into account
settings made by the rider.
4
69
OE
z