Pro Riding Mode - BMW R 1200GS 2016 Rider's Manual

NOTICE
Enduro
When selecting the
PRO
riding mode: keep in mind
that ABS control for the rear
wheel is deactivated.
The following riding modes can
be selected:
RAIN
: when riding on wet
roads.
ROAD
: When riding on dry
roads.
with riding modes Pro
The following riding modes can
also be selected:
DYNA
: For brisk riding on dry
roads.
Enduro
: when riding off-
road with road tires.
with riding modes Pro
With the coding plug installed,
DYNA PRO
the riding modes
Enduro PRO
and
the riding modes
Enduro
DYNA PRO
ing on dry roads taking into
account settings made by the
rider.
Enduro PRO
with knobby off-road tires tak-
ing into account settings made
by the rider.
When the motorcycle is sta-
tionary, the selected riding
mode is activated after approx.
OE
2 seconds.
The new riding mode is acti-
vated during operation under
the following conditions:
Throttle grip is in idle position.
After the new riding mode is
activated, the clock is displayed
again.
OE
The values set in
MODE
tinuously but rather are only
replace
shown consecutively for a lim-
DYNA
and
:
: for dynamic rid-
: off-road riding
SETUP
are not displayed con-
ited time after the following
events:
After every Pre-Ride-Check for
PRO
active riding mode.
After changing to the
duro PRO
riding mode.
After changing to the
DYNA PRO
riding mode.
The riding mode selected and
its associated engine-charac-
teristic, ABS, ASC ⁄ DTC and
Dynamic ESA settings are re-
tained even after the ignition
has been switched off.

PRO riding mode

with riding modes Pro
Start SETUP MODE
Install coding plug (
Switching on ignition (
4
71
En-
z
OE
76).
48).