8
152
Install bulb socket 1 into the
headlight housing.
Position cover panel and install
it by turning clockwise.
z
Replacing front and
rear turn indicator light
sources
Park motorcycle, ensuring that
support surface is firm and
level.
Switch off ignition.
Remove the screw 1.
Remove the lens from the
housing by pulling it outward
on the side with the screw.
Remove bulb 1 from
light housing by turning it
counterclockwise.
Replace defective light source.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
To prevent contaminants from
being deposited on the glass