Anti-Theft Alarm (Dwa) - BMW R 1200GS 2016 Rider's Manual

General warning light
4
flashes yellow.
80
Stop symbol flashes briefly.
The stop symbol disap-
pears after the brakes have
been released completely.
Hill Start Control is turned off.
More detailed information on
z
Hill Start Control can be found
in the "Technology in detail"
chapter:
Function of the Hill Start Con-
trol ( 127)

Anti-theft alarm (DWA)

with anti-theft alarm system
OE
(DWA)
Activation
Switching on ignition (
Anti-theft alarm system set-
tings ( 81).
Turn off ignition.
If DWA is activated, DWA is
automatically activated after the
ignition is switched off.
Activation takes approximately
30 seconds to complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
The anti-theft alarm system is
active.
Alarm signal
The DWA alarm can be set off
by:
Motion sensor
Switching on ignition with an
unauthorized ignition key.
Disconnecting the DWA from
the motorcycle battery (DWA
battery takes over the power
supply – alarm sound only, haz-
ard warning lights do not flash).
48).
If the DWA battery is discharged
all functions remain operational;
the only difference is that the
alarm cannot be set off if the
system is disconnected from the
motorcycle battery.
The duration of the alarm is ap-
prox. 26 seconds. During the
alarm, an alarm tone sounds and
the turn indicators flash. The
type of alarm sound can be set
by an authorized BMW Motorrad
retailer.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched
on. The DWA LED then signals
the reason for the alarm for one
minute.