Jump-Starting - BMW R 1200GS 2016 Rider's Manual

surface, always use a clean, dry
cloth to hold the light source.
Install light source 1 by turning
clockwise in light housing.
Insert inside end of lens into
light housing and close it.
Fit the screw 1.
Replacing LED tail light
The LED tail light can only be
completely replaced.
For details please contact
a specialist service facility,
preferably an authorized
BMW Motorrad Retailer.
Replace additional LED
headlight
with LED auxiliary headlight
The LED additional headlights
can only be completely replaced;
it is not possible to replace indi-
vidual LEDs.
Please contact a specialized
workshop, preferably an autho-
rized BMW Motorrad retailer.

Jump-starting

ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the mo-
torcycle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
OA
Contact between crocodile
clips of jump leads and mo-
torcycle
Danger of short circuit
8
153
z