BMW R 1200GS 2016 Rider's Manual page 43

that can lead to an ABS error
message ( 117).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS deactivated
ABS indicator light lights
up.
Possible cause:
The ABS system was deacti-
vated by the rider.
Switch on ABS function
( 64).
ASC intervention
ASC indicator and warning
light flashes rapidly.
ASC has detected instability at
the rear wheel and responded
by reducing the torque. The in-
dicator and warning light flashes
longer than the ASC intervention
lasts. This feature continues to
furnish the rider with visual feed-
back confirming that the system
has initiated active closed-loop
intervention even after the critical
situation has passed.
ASC self-diagnosis not
completed
ASC indicator and warning
light flashes slowly.
Possible cause:
ASC self-diagnosis rou-
tine not completed
ASC is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
Ride off slowly. The ASC indi-
cator and warning light must go
out after several meters.
If the ASC indicator and warning
light continues to flash:
Contact an authorized work-
shop, preferably an authorized
BMW Motorrad retailer.
ASC deactivated
ASC indicator and warning
light lights up.
Possible cause:
The rider has switched off the
ASC system.
without riding modes Pro
Activating ASC function
( 65).
ASC error
ASC indicator and warning
light lights up.
Possible cause:
The ASC control unit has de-
tected a fault. The ASC function
is not available.
It remains possible to continue
riding. Please be aware that
3
41
z
OE