Installing the display panel
1.
Connect the eDP connector cable to the display assembly.
2.
Connect the camera cable connectors to the display assembly.
3.
Attach the display panel to the display assembly.
4.
Turn the display assembly over.
5.
Press on the sides of the display panel to secure it.
6.
Install the screws that secure the display panel to the display assembly.
7.
Install the battery.
8.
Follow the procedure in
Camera
Removing the camera
1.
Follow the procedure in
2.
Remove the:
a.
battery
b.
display panel
3.
To remove the camera:
a. Disconnect the camera cable from the assembly [1].
b. Remove the screws that secure the camera to the display panel [2].
c. Remove the adhesive tapes [3].
d. Lift and remove the camera from the computer [4].
After working inside your
Before working inside your
computer.
computer.
61