Display Connections; Remote Operation (Lan Unit "Scu-Lan10") Connection - Yaesu FTDX10 Operation Manual

Display connections

The video digital output of the FTDX10 transceiver can be shown on a large monitor. Use a commercially
available DVI-D cable to connect a display monitor directly to the "EXT-DISPLAY" terminal (DVI-D) on the
back of the FTDX10.
The DVI-D cable can be used with either single link or dual link.
EXT-DISPLAY DVI-D
DVI-D Cable

Remote operation (LAN unit "SCU-LAN10") connection

Operate the transceiver from a remote location. Use the optional LAN unit "SCU-LAN10" to connect the
FTDX10 to a LAN or the Internet, then use the PC control software that can be downloaded from the Yae-
su website. In addition to the basic remote operation of the transceiver, the LAN unit supports monitoring
the various scope displays, so you can operate comfortably. In addition to remote operation from a remote
location, you can connect to your home LAN and monitor the band status on a large display from a conve-
nient location away from the ham shack.
In addition to transmitted and received audio, the RF scope and AF scope can be remoted, so comfort-
able remote communication can be performed while easily setting and tuning the band status display,
making various filter settings, interference removal function, etc. are possible using the scope function
from a personal computer.
Internet
or
LAN network
Remote control PC
Remote control
SCU-LAN10
(option)
LAN
LAN
ACC
ACC
12