Yaesu FTDX10 Operation Manual page 100

OPERATION SETTING
- GENERAL -
NB WIDTH
Function: Sets the duration of the noise blanking
pulse to match various types of noise
compatible with the noise blanker func-
tion.
Available Values: 1 / 3 / 10 (msec)
Default Setting: 3msec
Description: Reduces long duration noise as well
as pulse noise by changing the set-
ting.
NB REJECTION
Function: Selects the level of noise attenuation.
Available Values: 10 / 30 / 40 (dB)
Default Setting: 30dB
BEEP LEVEL
Function: Sets the beep volume level.
Available Values: 0 - 100
Default Setting: 10
Description: The higher the setting, the louder the
sound becomes.
RF/SQL VR
Function: Selects the operation mode of the RF/
SQL knob.
Available Values: RF / SQL
Default Setting: RF
Description:
RF: Functions as the RF gain adjustment knob.
SQL: Functions as the Squelch level adjustment
knob.
TUNER SELECT
Function: Internal and external antenna tuner
settings.
Available Values: INT / EXT / ATAS
Default Setting: INT
Description: Select the antenna tuner to be used.
INT: Select this item when using the internal
antenna tuner.
EXT: Select this item when using the external
antenna tuner (the optional FC-40, etc.).
ATAS: Select this item when using the active
tuning antenna system ATAS-120A.
232C RATE
Function: Sets the baud rate for a RS-232C jack
CAT input.
Available Values: 4800 / 9600 / 19200 /
bps
Default Setting: 4800 bps
232C TIME OUT TIMER
Function: Time-Out-Timer for an RS-232C com-
Available Values: 10 / 100 / 1000 / 3000 (msec)
Default Setting: 10 msec
Description: Sets the Time-Out-Timer countdown
CAT RATE
Function: Sets the baud rate for a CAT command
Available Values: 4800 / 9600 / 19200 /
Default Setting: 38400 bps
CAT TIME OUT TIMER
Function: Sets the Time-Out Timer for a CAT
Available Values: 10 / 100 / 1000 / 3000 (msec)
Default Setting: 10 msec
Description: Sets the Time-Out Timer countdown
CAT RTS
Function: Configures the CAT RTS port setting.
Available Values: OFF / ON
Default Setting: ON
Description: Monitors the computer using the
ON: Monitors the computer status using the
RTS signal.
OFF: Disables the monitoring function.
QMB CH
Function: Number of channels setting of the
Available Values: 5ch / 10ch
Default Setting: 5ch
Description: Set the number of channels that can
MEM GROUP
Function: Sets the memory group function.
Available Values: OFF / ON
Default Setting: OFF
Description: Set this setting to "ON" to divide the
QUICK SPLIT INPUT
Function: Input a Quick Split offset frequency.
Available Values: OFF / ON
38400
Default Setting: OFF
Description: When this setting "ON", the Quick
mand input.
time for an RS-232C command in-
put.
input of the USB jack.
command input.
time for a CAT command input of the
USB jack.
RTS signal.
Quick Memory bank.
be registered in the Quick Memory
Bank.
memory channels into 6 groups.
Split offset frequency can be input
from the on-screen keyboard.
38400 bps
99