Yaesu FTDX10 Operation Manual page 93

TX BPF SEL
Function: Selects the audio passband of the DSP
modulator on the DATA mode.
Available Values: 50-3050 / 100-2900 / 200-2800
300-2700 / 400-2600 (Hz)
Default Setting: 300-27000 Hz
DATA MOD SOURCE
Function: Selects the transmit audio input jack in
the DATA mode by pressing the [VOX/
MOX] key.
Available Values: MIC / REAR
Default Setting: REAR
Description:
MIC: Audio is input from the MIC jack on the
front panel.
REAR: Disables the microphone circuit on the
front panel and inputs audio/data from the
USB jack or RTTY/DATA jack on the rear
panel.
REAR SELECT
Function: Selects the input jack of the DATA sig-
nal.
Available Values: DATA / USB
Default Setting: DATA
Description: Selects the input jack of the AM sig-
nal when "DATA MOD SOURCE" is
set to "REAR".
DATA: Is input to the RTTY/DATA jack on the
rear panel.
USB: Is input the USB jack on the rear panel.
RPORT GAIN
Function: Sets the level of the DATA signal input
when "DATA MOD SOURCE" is set to
"REAR".
Available Values: 0 - 100
Default Setting: 50
RPTT SELECT
Function: Sets the PTT control for the DATA
transmit signal.
Available Values: DAKY / RTS / DTR
Default Setting: DAKY
Description:
DAKY: Controls the DATA transmit signal from
the RTTY/DATA jack (pin 3) on the rear
panel.
DTR: Controls the DATA transmit signal from
the USB virtual COM/DTR ports.
RTS: Controls the DATA transmit signal from
the USB virtual COM/RTS ports.
92
RADIO SETTING
- MODE RTTY -
AF TREBLE GAIN
Function: Sets the amount of gain in the treble
range of the received audio.
Available Values: -20 to +10
Default Setting: 0
Description: The amount of gain in the treble
range can be set in the range of -20
to +10.
AF MIDDLE TONE GAIN
Function: Setting the amount of gain in the mid-
dle range of the received audio.
Available Values: -20 to +10
Default Setting: 0
Description: The amount of gain in the middle
range can be set in the range of -20
to +10.
AF BASS GAIN
Function: Setting the amount of gain in the bass
range of the received audio.
Available Values: -20 to +10
Default Setting: 0
Description: The amount of gain in the bass
range can be set in the range of -20
to +10.
AGC FAST DELAY
Function: Sets the AGC-FAST DELAY voltage
decay characteristics for RTTY mode.
Available Values: 20 - 4000msec
Default Setting: 160msec
Description: Sets the AGC voltage decay char-
acteristics in 20msec steps after the
input signal level becomes lower
than the AGC detection level and the
HOLD time has expired.
AGC MID DELAY
Function: Sets the AGC-MID DELAY voltage de-
cay characteristics for RTTY mode.
Available Values: 20 - 4000msec
Default Setting: 500msec
Description: Sets the AGC voltage decay char-
acteristics in 20msec steps after the
input signal level becomes lower
than the AGC detection level and the
HOLD time has expired.