Data (Psk) Operation; Connecting To A Personal Computer; Connecting To The Data Communications Device - Yaesu FTDX10 Operation Manual

The FTDX10 PSK Decode Feature supports both BPSK and QPSK with error correction functions. Easily
synchronize PSK by aligning the marker on the TFT display screen.

Connecting to a Personal Computer

Connect the transceiver and a PC with a commercially available USB cable (A-B) to perform PSK data
communications using commercially available software and freeware.
To connect to a PC using a USB cable, a Virtual COM port driver must be installed on the PC.
Visit the Yaesu website http://www.yaesu.com/ to download the Virtual COM port driver and Installation Manu-
al.
To USB port

Connecting to the Data Communications Device

A Data Communications Device may be connected to the rear panel RTTY/DATA terminal. Be sure to
read the instruction manual of the Data Communications Device before connecting it.
DATA OUT
DATA PTT
DATA IN
GND

DATA (PSK) Operation

Commercially available USB (A-B) cable
RTTY/DATA Jack Inter Face
DATA IN （Pin 1） DATA OUT
GND （Pin 2） GND
DATA PTT （Pin 3） PACKET PTT
FSK IN （Pin 4） N.C.
DATA OUT （Pin 5） DATA IN
SQL OUT （Pin 6） N.C.
Inter Face
67