Table of Contents
Advertisement
Figure 23. Configurator interface (FM Racer configuration file
upload dialog)
• Find and choose the correct configuration file by following
the software prompts.
4.
Click the Upload Configuration button.
• The configuration file will be uploaded and applied to the
unit.
6.4. Viewing and accessing the FM Monitor settings
FM Monitor is Fluidmesh's diagnostic and analysis interface.
FM Monitor is used to:
• Monitor the real-time condition of Fluidmesh-based networks.
• Generate statistics from network history.
• Verify that device configuration settings are optimal for current
network conditions.
• Detect network-related events for diagnostic and repair purposes,
and generate alerts if network-related faults arise.
• Analyse network data with the goal of increasing system uptime and
maintaining optimum network performance.
• Generate and back up network statistics databases for future
reference.
© 2021 Cisco and/or its affiliates. All rights reserved.
Device configuration using the configurator interface
Page 50 of 138
Advertisement
Table of Contents
