Table of Contents
Advertisement
• The plug-in control buttons will be shown at the bottom of
the web page.
4.
Enter the unit identification number (5.a.b.c) or the unit serial
number of the Fluidmesh unit in the Mesh ID - Serial Number
field.
5.
Complete the plug-in activation process as shown in
activation" (page
7.2.4. Sharing License codes and accepting shared License codes
If needed, you can share license codes with other Fluidmesh device
users, and also have other Fluidmesh device users share their license
codes with you.
To share one or more license codes with another Fluidmesh device user,
do the steps that follow:
1.
Log on to the
2.
Click the Plug-ins link.
• The Plug-ins web page will be shown.
3.
Check the selection check-boxes to the left of the plug-ins that
must be shared.
4.
Click the Share button in the upper left-hand corner of the Plug-
ins web page
Figure 62. Plug-ins web page (Share button)
• The Share License Codes dialog will be shown.
5.
Enter one or more E-mail addresses to which the License codes
must be sent. Click the Share button.
• An E-mail containing the selected License codes will be
sent to the specified E-mail addresses.
• The License codes contained in the E-mail can be
converted to plug-in Activation codes in the normal way.
If needed, you can also ask another device user to share one or more
license codes with you. If a License code is shared with you, it will be
listed on your Partner Portal Plug-ins web page.
© 2021 Cisco and/or its affiliates. All rights reserved.
113).
Fluidmesh Partner
Portal.
(Figure 62 (page
118)).
Software Plug-Ins
"Plug-in
Page 118 of 138
Advertisement
Table of Contents
